Jump to content

Isoprene

From Wikipedia, the free encyclopedia
Isoprene
Full structural formula of isoprene
Full structural formula of isoprene
Skeletal formula of isoprene
Skeletal formula of isoprene
Ball-and-stick model of isoprene
Ball-and-stick model of isoprene
Space-filling model of isoprene
Space-filling model of isoprene
Names
IUPAC name
Isoprene
Preferred IUPAC name
2-Methylbuta-1,3-diene
Other names
2-Methyl-1,3-butadiene
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.001.040 Edit this at Wikidata
KEGG
UNII
  • InChI=1S/C5H8/c1-4-5(2)3/h4H,1-2H2,3H3 checkY
    Key: RRHGJUQNOFWUDK-UHFFFAOYSA-N checkY
  • InChI=1/C5H8/c1-4-5(2)3/h4H,1-2H2,3H3
    Key: RRHGJUQNOFWUDK-UHFFFAOYAS
  • CC(=C)C=C
Properties
C5H8
Molar mass 68.12 g/mol
Density 0.681 g/cm3
Melting point −143.95 °C (−227.11 °F; 129.20 K)
Boiling point 34.067 °C (93.321 °F; 307.217 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Isoprene, or 2-methyl-1,3-butadiene, is a common volatile organic compound with the formula CH2=C(CH3)−CH=CH2. In its pure form it is a colorless volatile liquid. It is produced by many plants and animals[1] (including humans) and its polymers are the main component of natural rubber.

History and etymology

[edit]

C. G. Williams named the compound in 1860 after obtaining it from the pyrolysis of natural rubber. He correctly deduced the mass shares of carbon and hydrogen[2] (but due to modern atomic weight of carbon not yet adopted at the Karlsruhe Congress arrived at an incorrect formula C10H8). He didn't specify the reasons for the name, but it's hypothesized that it came from "propylene" with which isoprene shares some physical and chemical properties. The first one to observe recombination of isoprene into rubber-like substance was Gustave Bouchardat [de] in 1879, and William A. Tilden identified its structure five years later.[3]

Natural occurrences

[edit]
Dimethylallyl pyrophosphate, not isoprene itself, is the source of most terpenes.

Isoprene is produced and emitted by many species of trees (major producers are oaks, poplars, eucalyptus, and some legumes). Yearly production of isoprene emissions by vegetation is around 600 million metric tons, half from tropical broadleaf trees and the remainder primarily from shrubs.[4] This is about equivalent to methane emissions and accounts for around one-third of all hydrocarbons released into the atmosphere. In deciduous forests, isoprene makes up approximately 80% of hydrocarbon emissions. While their contribution is small compared to trees, microscopic and macroscopic algae also produce isoprene.[5]

Plants

[edit]

Isoprene is made through the methyl-erythritol 4-phosphate pathway (MEP pathway, also called the non-mevalonate pathway) in the chloroplasts of plants. One of the two end-products of MEP pathway, dimethylallyl pyrophosphate (DMAPP), is cleaved by the enzyme isoprene synthase to form isoprene and diphosphate. Therefore, inhibitors that block the MEP pathway, such as fosmidomycin, also block isoprene formation. Isoprene emission increases dramatically with temperature and maximizes at around 40 °C. This has led to the hypothesis that isoprene may protect plants against heat stress (thermotolerance hypothesis, see below). Emission of isoprene is also observed in some bacteria and this is thought to come from non-enzymatic degradations from DMAPP. Global emission of isoprene by plants is estimated at 350 million tons per year.[6]

Regulation

[edit]

Isoprene emission in plants is controlled both by the availability of the substrate (DMAPP) and by enzyme (isoprene synthase) activity. In particular, light, CO2 and O2 dependencies of isoprene emission are controlled by substrate availability, whereas temperature dependency of isoprene emission is regulated both by substrate level and enzyme activity.

Human & other organisms

[edit]

Isoprene is the most abundant hydrocarbon measurable in the breath of humans.[7][8][9] The estimated production rate of isoprene in the human body is 0.15 μmol/(kg·h), equivalent to approximately 17 mg/day for a person weighing 70 kg. Human breath isoprene originates from lipolytic cholesterol metabolism within the skeletal muscular peroxisomes and IDI2 gene acts as the production determinant.[10] Due to the absence of IDI2 gene, animals such as pigs and bottle-nose dolphins do not exhale isoprene.

Isoprene is common in low concentrations in many foods. Many species of soil and marine bacteria, such as Actinomycetota, are capable of degrading isoprene and using it as a fuel source.

Chemical structure of cis-polyisoprene, the main constituent of natural rubber

Biological roles

[edit]

Isoprene emission appears to be a mechanism that trees use to combat abiotic stresses.[11] In particular, isoprene has been shown to protect against moderate heat stress (around 40 °C). It may also protect plants against large fluctuations in leaf temperature. Isoprene is incorporated into and helps stabilize cell membranes in response to heat stress.

Isoprene also confers resistance to reactive oxygen species.[12] The amount of isoprene released from isoprene-emitting vegetation depends on leaf mass, leaf area, light (particularly photosynthetic photon flux density, or PPFD) and leaf temperature. Thus, during the night, little isoprene is emitted from tree leaves, whereas daytime emissions are expected to be substantial during hot and sunny days, up to 25 μg/(g dry-leaf-weight)/hour in many oak species.[13]

Isoprenoids

[edit]

The isoprene skeleton can be found in naturally occurring compounds called terpenes and terpenoid (oxygenated terpenes), collectively called isoprenoids. These compounds do not arise from isoprene itself. Instead, the precursor to isoprene units in biological systems is dimethylallyl pyrophosphate (DMAPP) and its isomer isopentenyl pyrophosphate (IPP). The plural 'isoprenes' is sometimes used to refer to terpenes in general.

Examples of isoprenoids include carotene, phytol, retinol (vitamin A), tocopherol (vitamin E), dolichols, and squalene. Heme A has an isoprenoid tail, and lanosterol, the sterol precursor in animals, is derived from squalene and hence from isoprene. The functional isoprene units in biological systems are dimethylallyl pyrophosphate (DMAPP) and its isomer isopentenyl pyrophosphate (IPP), which are used in the biosynthesis of naturally occurring isoprenoids such as carotenoids, quinones, lanosterol derivatives (e.g. steroids) and the prenyl chains of certain compounds (e.g. phytol chain of chlorophyll). Isoprenes are used in the cell membrane monolayer of many Archaea, filling the space between the diglycerol tetraether head groups. This is thought to add structural resistance to harsh environments in which many Archaea are found.

Similarly, natural rubber is composed of linear polyisoprene chains of very high molecular weight and other natural molecules.[14]

Simplified version of the steroid synthesis pathway with the intermediates isopentenyl pyrophosphate (IPP), dimethylallyl pyrophosphate (DMAPP), geranyl pyrophosphate (GPP) and squalene shown. Some intermediates are omitted.

Industrial production

[edit]

Isoprene is most readily available industrially as a byproduct of the thermal cracking of petroleum naphtha or oil, as a side product in the production of ethylene. Where thermal cracking of oil is less common, isopentane can be dehydrogenated or isoprene can be synthesized from isobutylene and formaldehyde. Where cheap acetylene is produced from coal-derived calcium carbide, it may be combined with acetone to make 3-methylbutynol which is then hydrogenated and dehydrated to isoprene.[15]

About 800,000 metric tons are produced annually. About 95% of isoprene production is used to produce cis-1,4-polyisoprene—a synthetic version of natural rubber.[14]

Natural rubber consists mainly of poly-cis-isoprene with a molecular mass of 100,000 to 1,000,000 g/mol. Typically natural rubber contains a few percent of other materials, such as proteins, fatty acids, resins, and inorganic materials. Some natural rubber sources, called gutta percha, are composed of trans-1,4-polyisoprene, a structural isomer that has similar, but not identical, properties.[14]

See also

[edit]

Further reading

[edit]
  • Greville Williams, C. (1860). "On Isoprene and Caoutchine". Proceedings of the Royal Society of London. 10: 516–519. JSTOR 111688.

References

[edit]
  1. ^ Sharkey TD (1996). "Isoprene synthesis by plants and animals". Endeavour. 20 (2): 74–8. doi:10.1016/0160-9327(96)10014-4. PMID 8690002.
  2. ^ Williams CG (1860). "On isoprene and caoutchine". Proceedings of the Royal Society of London. 10: 516–519. doi:10.1098/rspl.1859.0101. S2CID 104233421.
  3. ^ Loadman MJ (2012-12-06). Analysis of Rubber and Rubber-like Polymers. Springer. p. 10. ISBN 9789401144353.
  4. ^ Guenther A, Karl T, Harley P, Wiedinmyer C, Palmer PI, Geron C (2006). "Estimates of global terrestrial isoprene emissions using MEGAN (Model of Emissions of Gases and Aerosols from Nature)". Atmospheric Chemistry and Physics. 6 (11): 3181–3210. Bibcode:2006ACP.....6.3181G. doi:10.5194/acp-6-3181-2006. hdl:20.500.11820/429435d3-e131-45e2-8bba-42a3d552cc59.
  5. ^ Johnston A, Crombie AT, El Khawand M, Sims L, Whited GM, McGenity TJ, Colin Murrell J (September 2017). "Identification and characterisation of isoprene-degrading bacteria in an estuarine environment". Environmental Microbiology. 19 (9): 3526–3537. doi:10.1111/1462-2920.13842. PMC 6849523. PMID 28654185.
  6. ^ "Isoprene emissions version 2021". emissions.aeronomie.be. Retrieved 2022-09-26.
  7. ^ Gelmont D, Stein RA, Mead JF (April 1981). "Isoprene-the main hydrocarbon in human breath". Biochemical and Biophysical Research Communications. 99 (4): 1456–60. doi:10.1016/0006-291X(81)90782-8. PMID 7259787.
  8. ^ King J, Koc H, Unterkofler K, Mochalski P, Kupferthaler A, Teschl G, et al. (December 2010). "Physiological modeling of isoprene dynamics in exhaled breath". Journal of Theoretical Biology. 267 (4): 626–37. arXiv:1010.2145. Bibcode:2010JThBi.267..626K. doi:10.1016/j.jtbi.2010.09.028. PMID 20869370. S2CID 10267120.
  9. ^ Williams J, Stönner C, Wicker J, Krauter N, Derstroff B, Bourtsoukidis E, et al. (May 2016). "Cinema audiences reproducibly vary the chemical composition of air during films, by broadcasting scene specific emissions on breath". Scientific Reports. 6: 25464. Bibcode:2016NatSR...625464W. doi:10.1038/srep25464. PMC 4862009. PMID 27160439.
  10. ^ Sukul, Pritam; Richter, Anna; Junghanss, Christian; Schubert, Jochen K.; Miekisch, Wolfram (2023-09-30). "Origin of breath isoprene in humans is revealed via multi-omic investigations". Communications Biology. 6 (1): 1–12. doi:10.1038/s42003-023-05384-y. ISSN 2399-3642. PMC 10542801.
  11. ^ Sharkey TD, Wiberley AE, Donohue AR (January 2008). "Isoprene emission from plants: why and how". Annals of Botany. 101 (1): 5–18. doi:10.1093/aob/mcm240. PMC 2701830. PMID 17921528.
  12. ^ Vickers CE, Possell M, Cojocariu CI, Velikova VB, Laothawornkitkul J, Ryan A, et al. (May 2009). "Isoprene synthesis protects transgenic tobacco plants from oxidative stress". Plant, Cell & Environment. 32 (5): 520–31. doi:10.1111/j.1365-3040.2009.01946.x. PMID 19183288.
  13. ^ Benjamin MT, Sudol M, Bloch L, Winer AM (1996). "Low-emitting urban forests: A taxonomic methodology for assigning isoprene and monoterpene emission rates". Atmospheric Environment. 30 (9): 1437–1452. Bibcode:1996AtmEn..30.1437B. doi:10.1016/1352-2310(95)00439-4.
  14. ^ a b c Greve HH (2000). "Rubber, 2. Natural". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a23_225. ISBN 978-3527306732.
  15. ^ "Isoprene: Properties, Production And Uses". 2024-03-25. Retrieved 2024-11-03.

Further reading

[edit]
[edit]